Electricians in Glendale, CA
Compare local electricians, check their licenses, see what jobs cost in Glendale, and get free quotes.
- Free quotes, no obligation
- Typical cost $180–$710 for common jobs
Get free electrical quotes in Glendale
Top electricians near Glendale
See electricians near Glendale
Electrical in Glendale: what to know
Glendale is in Los Angeles County, covering ZIP codes 91046, 91201, 91202, 91203, 91204, 91205, 91206, 91207 and 3 more. Pros listed here also cover nearby La Cañada Flintridge, La Crescenta, La Crescenta-Montrose, Burbank, Tujunga, Pasadena, Altadena and Sunland. Most electrical jobs here cost $180–$710 for common jobs.
Hiring a licensed electrician in California
Look for a C-10 Electrical license from the Contractors State License Board (CSLB).
- Any job worth $1,000 or more in labor and materials must be done by a CSLB-licensed contractor.
- Licensed contractors must carry a $25,000 contractor bond, and workers' compensation if they have employees.
- For home improvement contracts, the down payment can't be more than 10% of the price or $1,000, whichever is less.
- Water heaters must be braced or strapped against earthquakes under state law.
Check a license on the Contractors State License Board (CSLB) site
How much does a electrician cost in Glendale?
Most electrical jobs in Glendale, CA cost $180–$710 for common jobs, with hourly rates around $75–$180. Expect a service call or trip fee of $90–$240.
| Job | Low | Typical | High |
|---|---|---|---|
| Install or replace an outlet | $140 | $270 | $470 |
| Install a GFCI outlet | $140 | $240 | $410 |
| Install a light fixture | $150 | $300 | $590 |
| Install a ceiling fan | $180 | $350 | $710 |
| Troubleshoot a dead circuit | $180 | $350 | $710 |
| Install a hardwired smoke detector | $120 | $240 | $410 |
| Install a Level 2 EV charger | $940 | $1,900 | $3,300 |
| Upgrade to a 200-amp panel | $2,100 | $3,550 | $5,900 |
| Rewire a house | $9,450 | $17,700 | $35,400 |
What affects the price
- Permits and inspections are required for most new circuits, panels and EV chargers.
- Older homes (knob-and-tube or aluminum wiring) take longer and may need upgrades to meet code.
- Running new wire through finished walls costs more than an open attic or crawl space.
- Fixture and charger prices are usually on top of labor.
Electricians in Glendale: FAQ
How much does a electrician cost in Glendale?
Most electrical jobs in Glendale, CA cost $180–$710 for common jobs. Hourly rates typically run $75–$180. These are estimates based on typical US prices adjusted for local costs — the job's size, materials and access all move the price, so compare two or three quotes before you hire.
How do I find a electrician near me in Glendale?
Enter your ZIP code at the top of this page — Glendale covers 91046, 91201, 91202, 91203, 91204, 91205, 91206, 91207 and 3 more — to see electricians who serve your address, then compare their profiles and get free quotes. Pros listed here also serve nearby Montrose, La Crescenta, Burbank.
Do electricians in Glendale charge a service call fee?
Many do. A trip or diagnostic fee of $90–$240 is common in Glendale, CA, and some pros credit it toward the repair if you hire them. Ask about it when you request a quote.
How do I choose the right electrician in Glendale?
Compare at least three pros. Check that their license is active with your state licensing board, ask for proof of insurance, read recent reviews, and get the scope, price and timeline in writing before work starts. Avoid paying the full amount up front.
Does a electrician need a license in California?
Any job worth $1,000 or more in labor and materials must be done by a CSLB-licensed contractor. For electrical work that means a C-10 Electrical license from the Contractors State License Board (CSLB). You can check any license number on the board's website before you hire.
Is it free to get quotes from electricians on Contractors2Hire?
Yes. Sending a request and comparing quotes is free, with no obligation to hire. You pay the pro you choose directly for the work.
Do I need a licensed electrician?
For anything beyond replacing a like-for-like switch or fixture, yes. New circuits, panel work and EV chargers usually need a permit, and most states require a licensed electrician to pull it.
How long does a panel upgrade take?
The work itself usually takes one day, with power off for several hours. Scheduling the permit, inspection and utility disconnect can add a week or two.
Areas and ZIP codes covered around Glendale
Glendale ZIP codes: 91046 · 91201 · 91202 · 91203 · 91204 · 91205 · 91206 · 91207 · 91208 · 91210 · 91214
Nearby communities: La Cañada Flintridge · La Crescenta · La Crescenta-Montrose · Burbank · Tujunga · Pasadena · Altadena · Sunland
Nearby service areas
- Electricians in Montrose, CA · 2 mi
- Electricians in La Crescenta, CA · 3 mi
- Electricians in Burbank, CA · 5 mi
- Electricians in Pasadena, CA · 6 mi
- Electricians in North Hollywood, CA · 8 mi
- Electricians in Van Nuys, CA · 11 mi
- Electricians in Monterey Park, CA · 11 mi
- Electricians in Beverly Hills, CA · 11 mi
- Electricians in Sherman Oaks, CA · 12 mi
- Electricians in Arcadia, CA · 12 mi
All electricians in California
More electricians in the region
- Electricians in Huntington Park, CA · 14 mi
- Electricians in Sylmar, CA · 14 mi
- Electricians in Los Angeles, CA · 15 mi
- Electricians in Pico Rivera, CA · 16 mi
- Electricians in Inglewood, CA · 17 mi
- Electricians in Reseda, CA · 17 mi
- Electricians in Tarzana, CA · 18 mi
- Electricians in Downey, CA · 18 mi
- Electricians in Azusa, CA · 19 mi
- Electricians in Hawthorne, CA · 19 mi
- Electricians in La Puente, CA · 20 mi
- Electricians in Compton, CA · 20 mi